Applications: Intrauterine Monitoring, Intensive Care Units, Infusion Pumps, Kidney Dialysis Machines, Vacuum Assisted Birth, Surgical Procedures

　　Industries: Medical

　　Description: The 1630 is a fully piezoresistive silicon pressure sensor for use in intrauterine pressure monitoring. The sensor is designed to be used with automated assembly equipment and can be dropped directly into a customer's disposable intrauterine housing. The sensor is designed to meet the requirements as described in the Association for the Advancement of Medical Instrumentation (AAMI) specification for Blood Pressure Transducers. The pressure sensor consists of a pressure sensing element mounted on a ceramic substrate. Thick film resistors on the ceramic substrate are laser trimmed for compensation and calibration. A plastic cap is attached to the ceramic substrate to provide an easy method of attachment to the customer’s assembly and protection for the sensing element. A dielectric gel is placed over the sensor to provide electrical and fluid isolation. The 1630 pressure sensors are batch manufactured in a 3x8 element array on a ceramic substrate (24 units per substrate). The products are shipped in anti-static shipping containers. They can also be shipped on a tape and reel. Performance characteristics and packaging can be easily tailored on a special order basis to meet the requirements of specific customers.

　　Features:

　　Disposable Blood Pressure Sensor
　　AAMI Specifications
　　Low Cost Disposable Medical Applications
　　Dielectric Gel Barrier
　　Fully Tested and Calibrated
　　Small Size and Reliable Performance
　　 Gel Isolation for Liquids
　　 Operates from 5°C to 45°C
　　Compatible for Automated Assembly
　　1% Accuracy for Replacements
　　 5.0 uV/V/mmHg Sensitivity
　　 Customization for OEM Applications

　　典型應用: 子宮內壓監測，重癥監護室，輸液泵，腎透析，真空吸引分娩，外科手術

　　行業: 醫療

　　產品描述: 1630硅壓阻式壓力傳感器用于有創血壓監測。傳感器適合自動化裝配，并可直接裝入客戶的一次性血壓計外殼內，符合AAMI規范。壓力傳感器由一個封裝在陶瓷基板上的傳感元件構成。陶瓷基板上的厚膜電阻經過激光修正，用于溫度補償和校正。陶瓷基板上的塑料蓋方便傳感器與客戶組件的連接，并可保護傳感元件。傳感器上的絕緣膠用于絕緣和隔離液體。1630壓力傳感器在陶瓷基板上排成3×8（24個/板），采用防靜電包裝，也可按卷帶式包裝。為了滿足特殊用戶的需求，產品性能和包裝方式可以定制。

　　特點:

　　一次性血壓傳感器
　　符合AAMI規范
　　低成本醫療應用
　　絕緣膠保護
　　溫度補償
　　尺寸小，性能可靠
　　工作溫度：5℃～45℃
　　適合自動化裝配
　　精度：1%
　　靈敏度：5.0uV/V/mmHg
　　為OEM客戶定制

　　1630壓力傳感器更多技術參數及規格書下載請瀏覽：http://www.sensorway.cn/sensors/542.html
　　
　　北京賽斯維測控技術有限公司產品咨詢熱線：010-84775646，84775648。